1, lubrication and maintenance are an important aspect of electric vehicles should be front axle, the central axis, flywheel, front fork shock absorber components, such as rotating the fulcrum of every six months to a year to conduct a scrub, on-demand add butter or oil.
2, adjust the brake system: The brake wire on the mounting screws loose, and then tightening or relaxing the brake wire, so that both sides of the brake block away from the cars circle the average distance of 1.5mm? D 2mm then tighten screws.
3, the electric line sometimes after a period of time the chain will be loose, adjust as follows:
Release the rear axle nut, screw tight chain will be deployed until the chain of elastic moderate, bearing in mind the rear wheel with the frame in parallel, and then tighten the nut on both sides. If the chain is tight, according to the above-mentioned method of reverse operation. Appropriate chain of elastic (sag 10mm? D15mm).
4, adjusting the level handlebar, the saddle on the attention of the security thread should not be exposed. And pay attention to the core screw fastening torque is not less than 18N.m.
5, adjusting the high and low saddle, the saddle on the attention of the security thread should not be exposed, and attention to saddle clamping nut and saddle tube clamp bolt fastening torque is not less than 18N.m.
6, to carry out regular checks brakes performance is good, pay attention to rain, snow and the next ride to increase braking distance.
