Applicable models:
1, woodworking lathe: TП200, other woodworking lathe.
2, Wood Milling Machines: MX529 (ФM), MX5212, Ф-3, X519, MX518 (ФЩ-3), MX2116A, wood milling 2120, mortising machine, slotting machine.
3, woodworking planer: MB403 (CП30-1) MB206 (438), CP6-2, MB503A (412), БP-75, CФ-6, JF5001, woodworking planer other.
1, woodworking bed accounts: 296211, MK515, accounting for other woodworking bed.
2, carpenters sawing machine: Ф48 "sports band saw machines, Ф36" band saw machines, T-80, ЛC80-2 ,70-10-1, MJ224 (YH), ЦДK-4, ЦДK -2, ПK3-2, 91932, other woodworking sawing machine.
1, where a person has a fixed operation of woodworking machines, the operator must pass the examination, possession of the machine tool's "permit the operation of equipment" in order to operate; do not have a fixed hand operated woodworking machines, so that the staff should hold the machine "Permit the operation of equipment" in order to use machine.
Second, seriously implement the following general-purpose woodworking machine tool provides:
(A) before the serious job to do:
1, fixed machine has special operations, the operator should carefully read交接班records, understanding of the functioning of a group of machine tools and existing problems.
2, inspection tools and job site, if there is nothing to do with the job should be cleared of debris.
3, inspection security device should be fully intact. Without protective devices are not allowed to operate the machine.
1, inspection operation should be placed at the non-working position.
2, inspection of electrical distribution box should be closed solid, a good electrical grounding.
3, inspection lubrication oil reservoir sites should be adequate, well-sealed. Standard Oil, oil cups, glib, etc. should be complete, installed correctly, plug the oil-free eye. In accordance with the provisions of lubrication charts come on.
4, parking one or more classes of machine tool operation and air testing should be confirmed before the job is running normally.
(B) work conscientiously done:
1, fixed machine has special operations, the operator should stand fast at their posts, serious operation, do nothing to do with the job. When leaving the machine to stop, cutting off power supply. Do not return to set free the operation of machine tools, machine tool user has finished, it should stop, shut off power.
2, tool, wood should be the correct clamping, fastening solid.
3, transmission and mechanical variable-speed feed, we must leave the workpiece in the tool to carry out after parking.
4, the attention of the wood may not have nails to prevent damage to tool.
One, pay close attention to the functioning of machine tools, lubrication, the temperature rise, the voices of the situation and report any anomalies should be immediately stopped and inspection, troubleshooting and then job.
2, machine tools should be immediately stopped and the accident happened, and maintain the scene of the accident, the report deal with relevant analysis.
(C) after a serious job to do:
1, the operating handle on the non-working position, cutting off power supply.
2, wipe machine tools, job site clean-up.
Three, seriously implement the following special provisions of woodworking machines:
(1) woodworking lathe:
Tool should be installed in the adjustable tool holder or a close grip on the turret turning, with some turning left are not allowed.
(B) woodworking milling machines:
1, when the job has to wait until the normal functioning of the spindle feed milling, the use of large-diameter milling cutter should be slow to open.
2, spindle movements should not be too fast, hard-depth not be too big, have to manually feed evenly.
3, the need to reverse the spindle, the tool to be retired from the workpiece, the spindle rotation to stop after reversing.
4, ФM woodworking milling machine, only permit in the 1320 r / min the rate of use of head, and the remaining 2010,2645,4080
Three types of speed are not allowed to use to carry out Milling Cutter.
(C) woodworking planer:
1, before the job manually set cars, confirmed a flexible tool in order to start rotating machine.
2, machine tools before starting the normal operation of planer material.
3, flat-plane: (1) should be based on the width of mobile timber fenders.
(2) plane is expected to pay attention to check the knots of wood on the die are still alive in order to avoid wounding shot.
4, pressure plane: planed wood materials to the attention of Big head small tail, according to the size of wood to eat to the appropriate force, the largest not be more than 5 centimeters.
(D) Wood sawing machine:
1, circular saw machines:
(1) circular saw blades should be checked before the installation is correct, reliable fastening. Vehicles should be used manually rotating flexible disk.
(2) when the cutting feed are not allowed to feed too much, as a result of feeding too much lead to slow down when the blade speed, it should be slightly to the retracement of wood, until it switched over a few resumes feeding.
